Japanned Door Lock, 13/16 to-pin

Surface Locks for Cabinet Doors

Quality Locks for Restorations and New Cabinetry Backset- Distance To Pin: 13/16" (21 mm) Overall: 1-5/8" x 2-5/8" (41 mm x 66 mm) Bolt Projection: 9/16" Key Size: Barrel:3/16" x 1-5/8", 2-1/4" Overall Length, Key-bit Height: 7/16" Finding an exact match for an old lock is not always possible, as only a limited amount of sizes are now  made.

More Japanned Door Locks: 10/16" to pin 1-1/16" to pin Keyhole-covers not-included as furniture style dictates design #0242, #0237, #0253 insert escutcheons fit this lock

This Japanned Door Lock  is a versatile antique design for use on cupboards, cabinets, and other furniture. It installs on the interior surface of the door frame. It is easily applied to both right and left hand doors without the need for mortising. The historic design is authentic, yet also complements contemporary and rustic styles.

These Japanned Door Locks are made of steel. Each has a historic black japanned-iron finish. This finish was developed in late 17th century Europe to imitate Asian lacquer work. Lock-bolt is brass plated. Strike is not included, as is not required. Made In England.

Choosing Surface Locks

For help measuring and selecting surface locks, we recommend reading: How to select, measure and install surface locks.

If replacing a lock:

• If you have old lock: measure distance between selvedge-edge (edge where bolt shoots through lock) to lock pin in center of keyhole. This measurement is known as the backset. 
• If original lock is not available, determine backset by measuring: distance from center of keyhole to edge of cabinet door. 
• The replacement lock's backset measurement must match location of keyhole in furniture.