Lamp Chimneys 2-1-8" x 6-1/2" are clear glass in a small, short shape.
When selecting replacement lamp chimneys: first determine chimney base diameter, known as the fitter. It is measured outside edge to outside edge across the bottom.
Glass is thin, very similar to many antique chimneys; use care when placing in burner/holder, do not force.
Reminiscent of vintage glass, occasional slight imperfections are normal as glass fabrication often produces minor variations in appearance, overall size and thickness of glass.
Actual glass size and appearance may slightly differ from what is pictured.
2-1/8" Bottom Fitter
Top Diameter: 1-1/2"
Selecting Lamp Chimneys
Oil Lamp Chimneys are used with or without a shade on antique lamps. Sometimes called glass globes or hurricanes these chimneys sit in a burner with tines or a chimney holder. The chimney is always put in burner first. The shade is then slipped over chimney.
Use withTorpedo Shaped Light Bulbs inside chimneys. These bulbs are required as they consume less space which allows more air to circulate thereby reducing heat build up.
Chimneys are reminiscent of old glass: measurements are approximate, occasional slight imperfections and mold marks are normal and not defects. Shape may vary from picture.
Chimneys are measured bottom diameter by height.
- Height is a matter of personal taste. Typically the oil lamp chimney extends up thru the middle of the lamp shade and rises 2″-4″ above the top of the shade.
- Bottom diameter is measured outside edge to outside edge. This measurement is important as it must fit the holder or burner. Most burners have a narrow seat for chimney to rest on. Particular care should be taken if the lamp is used to burn oil making sure the oil lamp chimney bottom fits securely.
- Measure the diameter of where a proper fitting chimney sits, once it is on the burner. This is best measured with calibers to get an accurate measurement. To test: cut a ring from paper the needed diameter. Slip down over burner to check fit.
- Fit: The chimney should put slight pressure on the tines of the chimney holder or burner which in turn holds the oil lamp chimney in a stable position. This ensures a proper updraft enabling the burner to function correctly.
Height and shape of chimneys affect the general appearance of oil lamps.
- Embossed, opal hobnail, and crimp top chimneys are typically used on lamps without a shade.
- The simpler styles with straight tops are most often used on lamps with a shade.
Free Shipping on Orders over $99 to the 48 contiguous US
Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA
Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.