Gear Table Slides
Gear Table Slides are retractable table extenders used on solid pedestal or non-dividing base tables where only the top extends and the base remains stationary. Equalizing rack & pinion assembly automatically extends or retracts both ends of table-top at the same time. One person can open tables to insert leaves while the base remains in the center. These equalizing table slides allow sliding with very little friction ensuring soft and easy sliding.
Expertly constructed of hardwood maple these quality table slides provide strong dependable service and smooth quiet action. These wood table slides have a specially designed arc, built into each side of slides, providing a continuous leveling support to table leaves when table tops are extended.
Closed Length of Table Slide:• Should be equal to or greater than, one-half the length of table-top when closed.
Leaf Opening Measurement:• Length of open area when slides are extended: should be slightly larger than combined width of table leaves.
Long Leaf-Openings:• When using more than 2 or 3, 12" leaves, a drop down center table leg is recommended for added support.
Table Slide Sections:• Extend to produce the leaf opening. The more overlap that is achieved, between sections, when leaves are placed in the table, the greater the support.
Additional Installation Information:
• See links at bottom of page.
• Sold per set, one table requires one set.
• Set includes two 3 section slides
• Individual wood sections are 1" wide by 2-1/4" high.
• At the curved arc the height is 2-1/2" high.
• Material: Hardwood, maple
• Sanded, Unfinished