Wood Table Slides
Wood Table Slides are designed for dividing base and dividing leg tables. Each table-top-half moves jointly with two legs or half pedestal, as slide allows gliding with very little friction ensuring soft and easy sliding. When pulled to open, the two table-half's separate, providing an area to insert table leaves. Table leaves can easily be removed and two table halves pushed back together.
Expertly constructed of hardwood maple these quality table slides provide strong dependable service and smooth quiet action. These wood table slides have a specially designed arc, built into each side of slides, providing a continuous leveling support to table leaves when table tops are extended.
• Sold per set
• Typical table requires one set
• Individual wood sections are 1" wide by 2-1/4" high.
• Curved arc height is 2-1/2"
• Material: Hardwood, maple
• Sanded, Unfinished
• See links at bottom of page for additional installation information.
Closed Length of Table Slide:• Should be equal to or greater than, one-half the length of table-top when closed.
Leaf Opening Measurement:• Length of open area when slides are extended: should be slightly larger than combined width of table leaves.
Long Leaf-Openings:• When using more than 2 or 3, 12" leaves, a drop down center table leg is recommended for added support.
Table Slide Sections:• Extend to produce the leaf opening. The more overlap that is achieved, between sections, when leaves are placed in the table, the greater the support.