Brass Shelf Brackets have a classic design to enhance and highlight your display shelving. Mount with either long or short arm supporting the shelf. Support arm should be approximately 75% the width of the shelf. Bracket has 4 screw holes: 1 on each end and 1 on each side near corner. Screws are provide in two lengths, longer screws are for wall.
Priced and sold per Pair
One pair contains two brackets
Cast Brass, polished finish
Matching wood screws included
Number of brackets used will depend on the length of the shelf and the weight it is supporting.
Short Arm Length: 5"
Long Arm Length: 8-1/2"
Using Brass Wood Screws
Care is required when installing brass screws. While these screws are the best match for most antique hardware however they are not as strong as steel screws. The screw is easily damaged if the hole is not properly prepared.
The best practice is to first drill a pilot hole. Use a drill bit slightly smaller than the overall width of the screw, including threads, to drill the hole. Then use a steel screw, the same size as brass screw, to “cut threads” in pilot hole, by screwing steel screw into and then out of hole.
Free Shipping on Orders over $99 to the 48 contiguous US
Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA
Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.