0

Your Cart is Empty

Item # 2652 S1

Lamp Cords with Plugs, SPT1, 12', Silver

Transparent Silver SPT-1 Lamp Cord with Plug is a great neutral color almost disappearing against many surfaces. Long 12 foot length suitable when lamp is a distance from outlet.   This special narrow size was used on most lighting from the 20th century. It has a thin plastic coating which easily slips 1/8 IP lamp pipe. Often used on vintage lighting and lamps where threading common size lamp wire through pipe is difficult. SPT rating designates the insulation thickness, thereby providing varying degrees of resistance to heat and abrasion. Higher SPT rating numbers provide more resistance to abrasion and more protection from electric shock.

 Before making any changes to electrical fixtures and/or lamps:

  • Disconnect plug/wire from the electrical source.
  • Turning lamp off will not protect you from electric shock.
  • If you are unsure how to safely proceed contact a licensed electrician.
  • U.L. Listed for use in hanging fixtures & sconces
  • Not approved for external wiring of table and floor lamps or lighting fixtures.
  • Matching, polarized molded-on plugs are attached to lamp cord.

  • 12 foot length
  • Approximate Cord Size: 1/8" x 5/16"
  • Easily slips 1/8 IP pipe
  • SPT-1 has Standard Plastic insulation of 0.3"
  • Size: 18/2, 18 gauge, 2 parallel copper wires: one positive/hot is smooth, one neutral/negative - has ribs.
  • U.L. and C.S.A. listed, 105 degrees.

Free Shipping on Orders over $99 to the 48 contiguous US

Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA

Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods