White SPT-1 Lamp Cord with Plug in an 12 foot length. White color merges with white and light color walls to not be a distraction. Most lighting from the 20th century was wired with this narrow width lamp cord. It has a thin plastic coating which easily slips 1/8 IP lamp pipe. Often used on vintage lighting and lamps where threading common size lamp wire through pipe is difficult. SPT rating designates the insulation thickness, thereby providing varying degrees of resistance to heat and abrasion. Higher SPT rating numbers provide more resistance to abrasion and more protection from electric shock.
Before making any changes to electrical fixtures and/or lamps:
Disconnect plug/wire from the electrical source.
Turning lamp off will not protect you from electric shock.
If you are unsure how to safely proceed contact a licensed electrician.
U.L. Listed for use in hanging fixtures & sconces
Not approved for external wiring of table and floor lamps or lighting fixtures.
Matching, polarized molded-on plugs are attached to lamp cord.
12 foot length
Approximate Cord Size: 1/8" x 5/16"
Easily slips 1/8 IP pipe
SPT-1 has Standard Plastic insulation of 0.3"
Size: 18/2, 18 gauge, 2 parallel copper wires: one positive/hot is smooth, one neutral/negative - has ribs.
U.L. and C.S.A. listed, 105 degrees.
Free Shipping on Orders over $99 to the 48 contiguous US
Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA
Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.