0

Your Cart is Empty

Item # 0791K

Roped Rosette Pulls, 3 inch boring

Roped-edge Rosette Pulls, with 3" centers, have a timeless design reproduced from styles used in the late 1700's. Decorative rope border coils around the circumference of rosettes to complement simple handle. Use on new and antique: chests, bureaus, dressers and tables. One handle is sufficient for small drawers whereas two handles are recommended for medium and large drawers. Brass is shiny with a lustrous lacquered finish which does not need polishing. Handle has trunnions to make it hang straight and prevent it from hitting furniture.
  • Sold each
  • Material: Brass
  • Finish: Polished & Lacquered
  • Two machine screws for mounting are included.
  • 3" Boring
  • Overall: 4" Wide x 1-7/8" High
  • Rosettes: 1" diameter, roped edge
  • Boring: mounting measurement, center-hole to center-hole
  • When replacing existing handles always check boring-measurement
  • How to Measure - Attach Drawer Pulls

    How to determine drawer pull size:

    Boring is the distance from center of mounting hole to center of adjacent mounting hole. If replacing handles on existing drawers, this is the most crucial measurement. More leeway is available when adding drawer pulls to new furniture or cabinets, as mounting holes can be drilled where needed.

    • Most common size boring is 3". Other less common center of hole to center of hole measurements: 2-1/2", 3-1/2" and 4" are available in limited designs. Large sizes such as 5" or 6" are very difficult to find.
    • Overall Size reflects: width and height of handle at widest point. Ideally a balanced relationship between drawer handle and drawer is best.

    How to Measure Handles

    Attaching Drawer Pulls & Knobs

    • Thread size is generally 8-32.
    • Mounting screws are used to attach many styles of drawer pulls and cabinet knobs. Screws are inserted from back of drawer, through mounting holes, into back of drawer pull or knob. Length supplied is determined by manufacturer. While supplied screw length is generally useful, occasionally a different size is required. Please let us know if you need a specific length. To determine the correct size: measure wood thickness and add 1/4".
    • Posts or Eyebolts are available in one length. Posts/eyebolts insert from front through holes in backplate, through mounting holes and are secured with nuts .Occasionally they may be too short to accommodate drawer thickness. Historically in this situation on antique furniture: a small shallow area is carved out of the drawer-interior around each mounting hole. This reduces the wood thickness at mounting-hole locations enabling shorter posts with nuts to be used. Diameter of carved area must be large enough to accommodate nut.

    Free Shipping on Orders over $99 to the 48 contiguous US

    Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA

    Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods