Serving Tray Handles mount to sides of tray, offering a handle for lifting and carrying trays. Solid brass construction, attach with provided wood screws. Surface may have occasional slight marking due to casting. Sold in pairs as 2 handles are required per tray, one handle for each short side.
Sold per Pair
One pair = 2 handles
One tray requires one pair
Finish: Polished, unlacquered to nicely age over time
Brass mounting screws included
Overall Width: 3-1/8"
Center Hole to Center Hole: 2-1/2"
3/4" Offset, distance from tray-edge to top outside-edge of handle
Overall Height: 2"
Using Brass Wood Screws
Care is required when installing brass screws. While these screws are the best match for most antique hardware however they are not as strong as steel screws. The screw is easily damaged if the hole is not properly prepared.
The best practice is to first drill a pilot hole. Use a drill bit slightly smaller than the overall width of the screw, including threads, to drill the hole. Then use a steel screw, the same size as brass screw, to “cut threads” in pilot hole, by screwing steel screw into and then out of hole.
Free Shipping on Orders over $99 to the 48 contiguous US
Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA
Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.