Wrap-around hinges enable door to swing 270 degrees. This wide radius permits door to swing out of the way, to side of cabinet. Interior of cabinet becomes more accessible than with doors opening on traditional hinges. Great for entertainment centers.Extruded brass with a polished finish.
For full overlay doors: 5/8"- 7/8" thick.
L shaped hinge leaf wraps around door, attaching to door back. Wrap around shape provides added support to door.
Mortise hinge leaf which attaches to cabinet carcass.
Priced and sold per pair
One pair equals two hinges
Use one pair to hang average cabinet door
Cabinet Plate: 3 screw holes
Material: Extruded Brass
For full overlay doors, 5/8"- 7/8" thick.
11/16" Wide x 1-9/16" High
Inside Depth : 7/16"
Door plate: 2 screw holes
1-9/16" Wide x 3/4" High
Inside Depth: 3/4"
Using Brass Wood Screws
Care is required when installing brass screws. While these screws are the best match for most antique hardware however they are not as strong as steel screws. The screw is easily damaged if the hole is not properly prepared.
The best practice is to first drill a pilot hole. Use a drill bit slightly smaller than the overall width of the screw, including threads, to drill the hole. Then use a steel screw, the same size as brass screw, to “cut threads” in pilot hole, by screwing steel screw into and then out of hole.
Free Shipping on Orders over $99 to the 48 contiguous US
Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA
Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.