Brass Gallery Rail - T Posts

** See:  Layout Guide**

Center Post for Gallery Railing

Overall Height: 2-1/4" Top Diameter: 1" Height to Top of Rail: 1-3/4" Base Diameter: 7/8" Screw-hole diameter: 11/64", 8-32 thread Rod Hole: for ¼” Diameter Rod

Matching Gallery Posts End Post Corner Post Wall-mount Post Wall Mount Post - Low Profile Brass Railing Rod 36" Length Rod  72" Length Rod  ** See bottom of page for install information. **

T Posts for Brass Gallery enable unique T configuration of rails. One rod passes all the way through 2 aligned holes in post, while the other rod inserts perpendicular to to previously placed rod. Once installed the rods form a T shape. Use with center, corner and/or end posts to complete your project.

Gallery Posts are raw unfinished - solid brass. See link above for additional information. They can be polished to a shiny glow or left to age naturally. Many customers color the brass to suit their needs. Although we do-not offer this option, if you search online there are various brass coloring techniques and solutions available.

Check attachment method to be sure it will work with your design.

Install: 3 attachment methods for Railing Posts

Machine-Screw Attachment Method for wood and stone

Best and easiest attachment method. Machine screw inserts through hole from underneath mounting surface and screws into bottom of post. Nickel-colored machine screws included.

• Drill hole through wood surface, insert screws from underneath of surface, through hole and thread into bottom of post.
• The gallery rail can be used on stone such as marble or granite provided holes are predrilled at post locations. Machine screws are inserted from under-side of stone, through hole and into base of post.
• If preferred: Brass Ball Head Screws or Brass Thumb Screws can be used, in place of standard machine screws, to attach posts. Use when screw head is visible. Sold separately.

Cap-Nut Attachment Method for wood, stone and tempered glass

This installation method provides an old-time appearance. as it displays a Brass Nut on underside of shelf. Use Threaded stem with brass cap nut in place of standard machine screw attachment method. It is sold separately.

• Drill hole through wood surface to accommodate a 3/8” diameter threaded stem.
• If used on marble, granite, or tempered glass: mounting-holes must be predrilled at post locations. 
• If post has brass-bushing in base: unscrew bushing and remove.
• Insert threaded stem from underneath surface, through hole and thread into bottom of post.
• Once installed, brass nut is seen on underside of shelf.