0

Your Cart is Empty

Item # 8642 W08

White Bell Lamp Shades, 8 inch

8" White Bell Lamp Shades are very small, fitting little lamps which have a harp fitter. Made of white silk, shades are full lined with self piping. 
  • Priced and sold each
  • Table lamp shades have a small 1/2" ring fitter at center top of shade frame.
  • Position this ring on top of lamp harp and secure with lamp finial
  • If shades need to match order together to insure matching dye lot
  • 8" Bottom
  • 4" Top
  • 6-1/4" Side
  • Lamps with Harps

    This shade type is built on a wire frame with a three wire spider and centered ring washer near the top of the shade. The washer ring slips down onto a harp, 1/8 IP pipe or cluster stem and is held in place with a lamp finial. 

    There are a few generalizations when replacing harp type lampshade, no hard and fast rules. It is always best to let your personal taste be the guiding influence. 

    Achieving a sense of balance and harmony between table lampshade and lamp base will present the best appearance. Lamp shade proportions should reflect lamp base proportions. Most table lamps are tall and slender. For these lamps the height of the lamp base will determine the bottom diameter of the new lamp shade.

    • Measure the lamp base height: distance between base (at table surface) to bottom of socket.
    • Select shade with a bottom measurement within 1" - 2" of lamp base height
    • Height of shade should be proportional to base. A good starting point is to try a shade approximately 2/3rd's the height of lamp base.

    Lamp with harp shade holder
    Some lamps have short squat bases requiring differently proportioned table lamp shades.

    • Measure the diameter of the lamp base at it's widest point.
    • Select shade with a base diameter 1-1/4 to 1-1/2 times larger than the widest portion of base.
    • Height should be similar to height of lamp base. Proportion is always a guiding factor. Shades for this style lamp tend to be shorter than shades used on taller lamps.

    Replacing a Table Lamp Shade on any lamp:

    • The bottom edge of the lamp shade should cover the socket but not the lamp base.
    • Determining the correct lamp shade position is best accomplished by viewing the lamp on the surface on which it will be permanently placed. Perspective changes when a lamp is place high on a mantel verses lower on a table.
    • Although a table lamp shade is used on lamp pipe and cluster stems the vast majority are used with a harp.
    • The advantage of harps is the ability to readily switch to different heights providing easy vertical adjustment.

    Harps are 2 part: U-shape bottom bracket with a detachable top harp. Typically harp and shade heights are the same or similar.

    Free Shipping on Orders over $99 to the 48 contiguous US

    Low $6.95 flat-rate shipping for orders less than $99 to the 48 contiguous states, USA

    Returns are accepted within 60 days of receipt for a full merchandise refund - your original payment method will be credited for the merchandise amount.

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods